DOGE 8 CLARITY (2022 RCA model) “NOS tubes version”

    DOGE 8 CLARITY (2022 RCA model) “NOS tubes version”

    (1 customer review)

    DOGE 8 Clarity is the most achieved version of Doge 8. It is a pure tube preamp with a built-in 100% tube phono stage. It has 5 Line inputs and one MM/MC tube phono input.


    > IN STOCK.

    Preparation time is 5/6 working days after payment.


    2022 version: goes slightly on the warmer side with more details as well.


    Note about chassis color: available in black at this time. Please main in mid of February for silver availability.



    This was a limited edition of Doge 8 Clarity with incredible UK “NOS” tubes from the 80’s. This page is now just for reference, we explain you below how to source the tubes by yourself.


    Compared to the “standard” Doge 8 version, this “NOS version” is the same unit except that this “NOS version” will bring you one step further to the nirvana with its incredible UK brand MULLARD Reference CV4024 80’s. 

    Due to the complexity of sourcing NOS and limited quantities, we prefer to recommend you to buy them on Tube Amp Doctor Due to the complexity of sourcing NOS and limited quantities, WE STOPPED to offer it as a factory upgrade and we prefer to recommend you to buy them on Tube Amp Doctor the best tube dealer, which is now our regular supplier for input tubes

    if you want these tubes, just chose the fully balanced “standard version” and chose “no tubes, I have my owns” and then order 4 Mullard tubes on TAD.



    In 2011, Arthur Salvatore, an independent reviewer and quite famous in audiophiles circles, wrote on his audio blog

    “The Doge 8 may be the best preamplifier value in the history of audio”

    Please click here to read the section saying this statement about Doge 8.

    Please click here to read the full review of Arthur Salvatore about Doge 8.


    In 2008, James L. Darby in the blog not sure it still exists) wrote:

    “I cannot think of another preamp that offers the quality sound, build, and appearance of the Doge 8 at such a remarkable price of $1,599. And that does not include the bonuses of the balanced features and a high-quality phono preamp.”

    Indeed, Doge 8 is not just a great line preamp, but a comprehensive Line + Phono MM/MC preamp with a 100% tube phono stage, which is extremely rare today, in particular for MC cartridges.



    Doge 8 uses 8 tubes. Many of you asked us: “why so many tubes? Is your preamp a nuclear plant?? Shouldn’t the signal path be short?”

    More than simple: 4 tubes are dedicated to the phono stage. It is like a stand-alone phono preamp inside the preamp. 4 tubes are for the line stage. So finally the main section, the Line stage use only 4 tubes like most of the tube preamps.


    DOGE 8 CLARITY 2017 & 2019 Edition enjoyed very popular success, with an incredible satisfaction rate of 96% versus the already excellent satisfaction rate of 92% for older versions.

    The key feature since 2017 Edition is the use of high-end coupling capacitors from the UK, the audiophile-grade ClarityCap ‘ESA’ model that is, in our opinion, the best cost/performance choice on the market today. We have been so impressed by the improvement in sound performance compared to Wima caps, that we installed them on all our products. As a reference among many, several famous speakers brands in the range $10,000 to $25,000 use them for the crossover.

    We have chosen the adjective ‘Clarity’ for the latest version of DOGE 8 with reference to the ClarityCap brand and also because this adjective reflects very well DOGE 8’s main qualities of transparency and neutrality.

    There are many testimonies in forums and blogs reporting that the Doge 8 is the best preamp in the world in this price range. We won’t make that claim ourselves as we haven’t listened to all the other preamps in the world, but we are very proud of these owners’ feedback. We also received direct sales customers’ feedback that it has no competitors below $5,000 or sometimes that it is simply the best preamp they’ve ever heard.



    Below are the marks Doge 8 got in the famous STEREO Deutsch magazine at the price of 6,800€ (=$8000) under the reference name LUA Reference No.7.

    Not only Doge 8 (under LUA OEM name) got the extremely rare rating of 100% for sound performance, but it got at the same time 5 stars award for performance versus price!!

    This 100% mark was won with NOS tubes, Brimar for Line stage and Mullard for phono stage. 

    THIS VERSION IS SUPPLIED WITH EXACTLY THE SAME TUBES AS THOSE OF THE STEREO BENCHMARK FOR THE LINE STAGE. For the phono stage, as Mullard reached unit prices from $250 to $300 which is ridiculous, we supply new production tubes, the least microphonics tubes of “TAD Premium Selected” range, the 7025/E83CC.


    LUA Reference N°7 internal

    (6,800€ = $8,000) with industrial Wima cap

    DOGE 8 CLARITY (2017 Edition)

    Doge 8 at $1669 with audiophile-grade Claritycap


    So when both an independent reviewer Arthur Salvatore and the famous STEREO magazine say for the first that Doge 8 may be the best value preamp in the history of audio for the first and for the latter that it is worth 5 stars for its price value at $,8000, then I hope reading this section, you will have less and fewer doubts that Doge 8 is insane value.

    Not let’s go to a sensitive topic. You might think, and that would make sense, that probably we sold in this OEM partnership our schematics and PCB of Doge 8 but certainly, the German OEM customer had put higher range components in it to go to that level of price.


    The LUA reference No.7 uses extremely reliable but industrial Wima coupling capacitors (the ugly red 16 plastic bright stuff 😉 ) whereas our audiophiles UK Claritycaps are 10 times the price of Wimas. You can also note the number of white plastic connectors required by Mr. Lua whereas our Doge 8 use soldering only, for perfect conduction and to avoid any loose contact.

    DOGE products are clearly higher standards than past LUA German products. Doge 8 is a true bargain considering it bests the $8,000 “Lua Reference No.7″ in both quality of parts and performance

    This preamp is incredibly neutral and transparent and provides all that you expect from a high-end preamp. You will be delighted by the silky sound of the Doge 8 Clarity. It has a little warmth which you can expect from a tube device, but not an exaggerated warmth compared to many other tube preamps. Those of our clientele that own solid-state power amplifiers will like this transparency and subtlety and warmth.

    The schematics (circuit design) of the Doge 8 Clarity is both simple and sophisticated at the same time. It allows perfect matching with any power amplifiers on the market by utilizing a sophisticated buffer stage driven by a current generator called “MU follower.” The outcome is a perfect impedance match with any amplifier in perfect synergy.

    Doge 8 Clarity uses 2 transformers and a choke with Pi filtering (a choke is a power supply filtering device that has a similar manufacturing process to a transformer but with only one wiring) which allows very silent power. The transformer is an Ei type with Z10 Japanese core steel and on purpose, not the R-core type asked by LUA in Reference No.7 above. Mr. Liu our chairman and designer doesn’t like R-core transformers and thinks they are not suited for tube amps and we can explain why by email, but we don’t want to enter in magnetic fields topics here.

    One transformer is for main power and the second one is for standby mode and digital functions of the remote controller and relays activation. This makes a full separation of the digital and analog functions. Please note that in standby mode, only the small 5W transformer remains “on”, the main power is off and the tubes as well.

    Most components are imported brands. The electrolytic capacitors are Japanese Nippon Chemicon, while film capacitors are German WIMA for less sensitive ones, and, for the most sensitive ones, the coupling capacitors which the signal passes through, we now use the ESA model of the UK brand Claritycap. Relays for input selection are German OMRON. And last but not least, you would be surprised if you were comparing the signal cable we use and those of well-known brands. Our signal cable is a very high-grade silver-PTFE type with shielding it has surprised a lot of reviewers as none was used to such silver cable quality for such a price level. We put attention to any single detail, like even shielding the inputs board with the relays.

    The chassis is particularly tough and luxurious due to the use of 6mm thick aluminum for all panels. The front panel finish is brushed anodized aluminum.

    The connectors are from the highest grade, sourced from Taiwan, with 5µm gold plating.



    Doge 8 has a high-quality built-in phono stage, and this phono stage is with tubes only. There is no phono output as the phono stage is designed especially to match with the line stage. However, it is not a cheap phono stage just for the purpose to say “there is a phono stage”… it is a comprehensive phono stage with 3 choices of input: MM/MC low/MC high. MC low sensitivity is for cartridges between 0.1mV to 0.2mV and MC high sensitivity is for cartridge between 0.25mV to 0.5mV.

    What is important to point out is that both MM and MC are true tube phono stages with zero solid state. There were many rumors on forums, all good-faith rumors that some Doge 8 versions had a Jfet pre-stage for MC. There has never been any single version of Doge 8 with a Jfet pre-stage for MC. Our OEM German partner LUA  asked us to do this, that’s the reason some of you might have been confused. Here is a photo that can help you to understand this.

    The RCA inputs for phono (and now the dip-switches selectors for impedance) are well shielded by a stainless steel cage which probably made some of our customers think that it was a Jfet stage.

    It is nothing very important, but we wanted to take the opportunity to clarify that point as we have regular questions about this point. All Doge 8 versions got a 100% tube phono stage since the first unit was released in 2006.

    In the 2019 Edition, and current 2022 version we improved the photo stage and we added :

    • DIP switches at the back panel to enlarge the choice of impedance input for MC cartridges with 3 choices in (100 ohms, 300 ohms, 1 Kohms) 
    • DIP switches at the back panel to enlarge the choice of capacitance input for all cartridges with 4 choices in total (47pf, 100pf, 150pf, 220pf)




    Factory-direct price: once you will have added the product to the cart (without the need to register) you will fill your country and see the total price including delivery to your front door, Paypal or Credit card fees, and one year warranty served in your country.

    If you pay by bank transfer, you will get 5% discount as our bank doesn’t charge fees so we refund Paypal financial gateway fees doing so, and you can also pay by credit card through and get 5% discount. which is an alternative financial gateway ultra secured that offers an exclusive hybrid system, you fund by credit card, and the money arrives on our bank account.

    Possible taxes in your country are at your charge.



    We said above that DOGE 8 got the mark 100% with NOS tubes. We are pleased to announce that Doge now offers a factory upgraded version with the same range of tubes that got the 100% mark in the german magazine STEREO, the UK brand MULLARD CV4024. Those tubes are military-grade and were made for NATO.

    If you can find those NOS at a better price than us, you are free to order without tubes.

    If it exceeds your budget, you can choose TAD GE/JAN Premium Selected.

    This is for the Line stage which use 12AT7.

    For the phono stage that uses 12AX7, now all NOS tubes are overrated. Their value is just rarety not quality. Just for reference, the phono stage was with Mullard which costs $250 to $300. It remains just a few hundred worldwide.

    We prefer to offer for the phono stage, particularly knowing that not everybody will use phono, the excellent TAD 7025/E83CC that are selected by TAD to have zero microphonic.

    The German company TAD (Tube Amp Doctor) is the biggest tube dealer worldwide and makes its own brand of tubes which are in fact tubes manufactured by most famous tube companies, but with very severe sorting done in their TAD german Labs. Only the best 20% tubes are selected to become a “TAD Premium Selected” tube.

    What makes a preamp tube become a TAD PREMIUM SELECTED?

    All preamp tubes labeled Premium Selected have passed the following tests:
    –      Low Noise Test
    –      Microphonic Test
    –      Gain Test
    –      Sonic Tests
    –      Shock Tests
    –      Listening Tests
    –      Balanced Output Test


    Please go there to read about it. Basically, it is one extra tube of each.


    Please note that for safety reasons to follow the international air freight regulations, remote controllers are supplied without batteries. They use the traditional AA type. Thanks for your understanding and please think to buy a pair prior to the delivery.

    Vacuum tubes MULLARD CV4024 x 4 for line stage, TAD E83CC x 4 for Phono stage
    RCA Line inputs5
    RCA Phono inputs1 input compliant for MC & MM cartridges
    RCA pre-out2
    RCA tape-out1
    XLR outputsNo
    Remote controlleryes
    Stand-by functionyes
    Remote controller materialLuxury black aluminum
    Bandwidth12Hz to 30KHz
    Signal to noise ratio>101db at 20V
    Input impedance50K ohms
    Input sensitivity200mV
    MM input sensitivity3mV to 6mV
    MC input sensitivity0.25mV to 0.6mV
    Max output power20V
    Output impedance600 ohms
    Size in inchesW:17″ x D:14.5″ x H:5.1/4″
    Size in mmW:44cm x D:36cm x H:11cm
    Weight in KG14kg + packing
    VoltageDepending on your country 120V, 220V, 230V, 240V (100V on special order)
    Warranty1 year for electronic, 3 months for vacuum tubes

    1 review for DOGE 8 CLARITY (2022 RCA model) “NOS tubes version”

    1. fbernardl

      I have had this preamp for about 1 year. It came with the NOS brimmer . Before I ordered it I had the Doge dac.The main source of music was my laptop with Doge dac going into the Outlaw receiver the dac was a big improvement over the dac in the receiver. I change the TAD that came with dac to new production tungsol. Warmer sound with better details. I was not satisfied with overall sound of system. Bass was not detailed at times and I was not always enjoying it. Decided to for separates. With a good result from the dac and after reading all the reviews on the preamp snd Jay’s review., I brought the preamp with nos. It is connected to a Cary Cad 120. The Cary had good lions power tubes and I’m put tubes were nos tungsol. For a while the sound was good, until I got a turntable. Listening to the turntable revealed the limitations of the digital section. The sound was more engaging and better in all respects. No longer happy with listening to streaming and cd , I decided to up grade. Enter the network bridge, Sonore optical rendu. Much better than the laptop I was using. However the sound was still not as enjoyable as the turntable. The digital was to laidback. Vocals were good but everything, something was missing. I decided to put the TADs back in the preamp. Things were a little t better. Through a series of events, I needed to replace the nos in the amp. I decided to to go with psvane. Kept the gold lions kt88 in. Sound stage improved with psvane but everything was worse. The psvane needed burn in time. However , figured the too laidback sound maybe the brimmers . Decided to try a pair of gold lions in the v6 and v7 location. After about 200 hours of burn in on the psvane. The system sound balance and smoother. Not too laidback and not to harsh. Good vocals and detail. I listen at low volume and medium, different time throughout the day and enjoy the system. I am pleased with both the dac and the preamp now. Both are excellent products. The beauty of having a tube based dac and preamp,it allows you to change the signature of the sound to your liking. I have the original TADs back in the dac and a mixture of nos brimmers with gold lions in the preamp and the TADs in the phono stage. I don’t know if the nos are worth it. Nos or new and which brand of tubes to use is system dependent. I am happy with my purchase of both products.

    Add a review

    Your email address will not be published. Required fields are marked *

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.