info@doge.audio

We sell direct to you

  info@doge.audio

We sell direct to you

SET DOGE8/DOGE9

Our new flagship amps with Autobias and Class A Dual Mode

SET DOGE8/DOGE9

These power blocks are simply incredible. They will offer you the better sound money can buy for this range of products.

$4,990.00

Category:

Description

THIS PAGE IS TO ORDER ONE SET DOGE8/DOGE9 composed of :

  1. ONE PAIRE OF DOGE 9 PAB
  2. ONE PREAMP DOGE 8 Clarity
  3.  ONE INTERCONNECTION CABLE to switch one the DOGE 9 from DOGE 8 remote controller

For the product descriptions, please refer individually to DOGE 9 PAB  page and DOGE 8 Clarity page.

 

 

 

 

PRICE POLICY

Please note we have decrease our prices as Chinese Yuan got weaker these past months. We might increase our prices at any time in the reverse situation.

> Estimated retail price in shops : $8,490 (excluding VAT)

Get a super attractive factory-direct price for a SET including one pair of DOGE 9 PAB + one DOGE 8 CLARITY unit + interconnection cable below : from $4,990 including delivery to your front door, Paypal or CC fees and one year warranty served in your country. Possible taxes in your country are at your charge.

From december 2017, we do the same prices worldwide except for Asia, Russia, Brazil, South-Africa and small islands.

 

INTERCONNECTION CABLE

A said above, when you have a set DOGE 8 + DOGE 9, there is an interesting feature which is that the DOGE 8 can automatically start the DOGE 9 blocks from DOGE 8 stand-by button or from DOGE 8 remote controller.

This Interconnection cable is automatically supplied if you buy a set D8/D9.

In case you already own a DOGE 8 and you buy the DOGE 9 PAB we charge the interconnection cable $85.

The length is 2.5 m for each block. In case you need additional lenght we charge $30 of cusomization fee and $20 per extra 0.5m.

DOGE 8 LP and DOGE 8 CLARITY are compliant with DOGE 9 PAB regarding interconnection cable. If you have an older version you will need to change a chip called EPROM, which is just plugged inside a socket. We will supply this EPROM for free if you ask it at the time your order your pair of DOGE 9 PAB.

 

VACUUM TUBES OPTIONAL UPGRADES :

Optional tubes upgrades. Prices are of the pair of blocks. They do not includes stock tubes. It is the difference of price between stock tubes and upgrade tubes.

  • Optional Psvane 211-TII instead of Psvane 211 Hifi-Series : $466 (total price for the two blocks)
  • Optional Shuguang 211-T instead of Psvane 211 Hifi-Series : $426 (total price for the two blocks)
  • Optional Psvane 12AT7-TII for the two 12AT7 into the signal path : $114 (total price for the two blocks)
  • Optional Psvane 6CA7-TII instead of Shuguang EL34 : $210 (total price for the two blocks)
  • Optional Shuguang 6CA7-Z instead of Shuguang EL34 : $146 (total price for the two blocks)

Rated power (class AB) 200W RMS per channel
Rated power (class A) 90W RMS per channel
Tubes components 211 x2, EL34 x2, 12AT7 x4 (for one mono-block)
RCA Inputs 1
Stand-by mode yes
Doge Soft-start yes
Auto-protection mode Yes
Bias PAB Autobias
Feedback selection switch Yes
Bandwidth 12Hz to 50KHz
Signal to noise ratio >90db
THD <0.15%
Input impedance 50K ohms
Input sensitivity 2V
Output impedance 1 x 8 ohms + 1 x 4 ohms
Size in inches W:17″ x D:19.7″ x H:12.2″
Size in cm W:43cm x D:50cm x H:31cm
Weight in pounds 106pds + packing (per block)
Weight in Kg 48kg + packing (per block)
Voltage depending your country Depending on your country 120V, 220V, 230V, 240V (100V on special order)
Warranty 1 years for electronics, 3 months for vacuum tubes

Reviews

There are no reviews yet.

Be the first to review “SET DOGE8/DOGE9”

Your email address will not be published. Required fields are marked *